# Knife steel: 8670

> What 8670 is, why it is called a great choice for tough knives and for beginners, what it gives up in wear resistance, and the route recommended for it.

Source: https://knifetemplates.com/steel/8670

[Learn](https://knifetemplates.com/guides) / [Steel](https://knifetemplates.com/steel)

If you want a tough knife and a forgiving heat treatment, 8670 is the steel I would check first. What you give up is edge life, which is a fair trade for the right knife.

[Knife Templates](https://knifetemplates.com/makers/knife-templates) · 2 min read

## What it is

8670 is a nickel-chromium alloyed steel with high toughness and easy heat treatment. The composition figures in the source article are in images and I found no producer datasheet for 8670, so I give none here. It is not stainless, so it rusts if left wet.

## What the testing found

It is a great choice for knives that need high toughness, and for beginning knifemakers and bladesmiths. The best specimens measured 27.4 ft-lbs in a quarter-size unnotched Charpy test, higher than the rest of that study using the same steel, so treat it as a best result and not an average.

The same view runs through the other testing: 8670 and 5160 are good choices for large knives that need very high toughness, a high toughness steel like 8670, Z-Tuff or AEB-L is better for hard use knives, and in forge testing 5160 and 8670 came out best for heavy choppers.

## What it costs

Wear resistance is relatively low, which means great ease in grinding, finishing and sharpening. The source article does not test edge retention, so I make no claim about it beyond that: choose 8670 for toughness and an easy shop, not for a long-lasting edge.

## Where to be careful

Overheating costs toughness for nothing: 1600-1625°F reduced toughness without improving hardness. No tempering embrittlement showed at 450°F in the tests, though some steels start to see tempered martensite embrittlement there. Be cautious about quenching anything in water.

## Where this comes from

- [How to Heat Treat 8670](https://knifesteelnerds.com/2021/04/26/how-to-heat-treat-8670/), Knife Steel Nerds. Larrin Thomas’s tests of 8670 with his recommended route. Composition figures and most results are in images, so this site quotes only the text. No producer datasheet for 8670 was found.
- [How to Pick the Best Steel for Every Knife](https://knifesteelnerds.com/2019/05/20/how-to-pick-the-best-steel-for-every-knife/), Knife Steel Nerds. Larrin Thomas’s method for choosing a steel, with his own recommendations. Opinion informed by his testing; the charts are images.
- [Knife Steels Rated by a Metallurgist: Toughness, Edge Retention, and Corrosion Resistance](https://knifesteelnerds.com/2021/10/19/knife-steels-rated-by-a-metallurgist-toughness-edge-retention-and-corrosion-resistance/), Knife Steel Nerds. One metallurgist’s ratings, which he says he may change. The rating tables are images, so this site quotes only the text.
- [How to Heat Treat Knife Steel in a Forge](https://knifesteelnerds.com/2021/09/23/how-to-heat-treat-knife-steel-in-a-forge/), Knife Steel Nerds. A method for reducing forge error, tested on seven low alloy steels. The author still recommends a furnace or a professional for most people.

[Next up Knife steel: D2 A high-carbon, high-chromium tool steel that is not stainless and wants a cold step.](https://knifetemplates.com/steel/d2)

## Keep reading

- [Knife steel: 5160](https://knifetemplates.com/steel/5160)
- [Knife steel: 80CrV2](https://knifetemplates.com/steel/80crv2)
- [Toughness, edge retention and corrosion resistance](https://knifetemplates.com/steel/toughness-edge-retention-corrosion)
- [Choosing steel for a knife](https://knifetemplates.com/steel)
- [All steel pages](https://knifetemplates.com/steel)

## Put it into practice

[Choose a template](https://knifetemplates.com/templates) [Read the print guide](https://knifetemplates.com/guides/print-at-actual-size) [Arrange blanks on stock](https://knifetemplates.com/nest)
