# Carbon, stainless, tool and powder metallurgy steels

> The families of knife steel, what each asks of the maker, and what powder metallurgy changes about the carbides.

Source: https://knifetemplates.com/steel/carbon-stainless-tool-and-powder

[Learn](https://knifetemplates.com/guides) / [Steel](https://knifetemplates.com/steel)

Knife steels fall into a few families, and the family tells you more about what the shop has to do than the grade does.

[Knife Templates](https://knifetemplates.com/makers/knife-templates) · 2 min read

## Carbon and low alloy

The steels on this site that are not stainless (1084, 1095, 80CrV2, 5160, 52100) are carbon or low alloy. They rust, they harden in oil at modest temperatures, and for forging, "Low alloy steels are significantly easier to forge for a variety of reasons." Their routes run from about 1475 to 1525°F.

## Tool steels

O1 is a tool steel, the family that gave knifemakers "the first 'oil hardening' steel developed in 1905." It is non-stainless, and its producers' sheets call for a modest hardening heat, 780 to 850°C, and an oil quench.

## Stainless

AEB-L and MagnaCut are stainless. Their routes need far higher temperatures (1066°C and 1121°C), foil or an atmosphere to protect the surface, plates for the quench, and for AEB-L a cold treatment. They also rule out the forge: "Basically any steel with 3% chromium or more" is unsuitable for the tested forge method.

## Powder metallurgy

"Powder metallurgy is a method by which very tiny ingots are formed." "Each particle of the powder is like its own tiny ingot," and "Therefore the cooling rates are much faster than conventional casting."

What it changes is the carbides. The result is "a much finer and more uniform carbide structure than in a conventionally cast steel," where "440C, D2, and 154CM with conventional casting and processing still have carbides that are greater than 10 microns." The process also let designers use more of some elements: "the powder metallurgy process would allow them to develop steels with higher vanadium contents." MagnaCut is a powder metallurgy steel.

## Where this comes from

- [How to Pick the Best Steel for Every Knife](https://knifesteelnerds.com/2019/05/20/how-to-pick-the-best-steel-for-every-knife/), Knife Steel Nerds. Larrin Thomas’s method for choosing a steel, with his own recommendations. Opinion informed by his testing; the charts are images.
- [How to Heat Treat Knife Steel in a Forge](https://knifesteelnerds.com/2021/09/23/how-to-heat-treat-knife-steel-in-a-forge/), Knife Steel Nerds. A method for reducing forge error, tested on seven low alloy steels. The author still recommends a furnace or a professional for most people.
- [What is Powder Metallurgy?](https://knifesteelnerds.com/2018/08/20/what-is-powder-metallurgy/), Knife Steel Nerds. How powder metallurgy steels are made and what it changes about the carbides.
- [CPM MagnaCut data sheet, issue 1, March 2021](https://www.alphaknifesupply.com/Pictures/Info/Steel/CPMMagnaCut-DS.pdf), Crucible Industries. The producer’s own composition, toughness, edge retention, annealing and heat treatment figures. Producer data, not independent testing.
- [Bainite Heat Treatments of 52100, O1, and 1095: How Much Toughness?](https://knifesteelnerds.com/2021/06/07/bainite-heat-treatments-of-52100-o1-and-1095-how-much-toughness/), Knife Steel Nerds. Austempering experiments and what they say about plate martensite in 1095 and O1. A different route from quench and temper.

[Next up Identifying stock steel Spark test patterns, and why unidentified stock stays an experiment.](https://knifetemplates.com/steel/identifying-stock-steel)

## Keep reading

- [What is in knife steel](https://knifetemplates.com/steel/what-is-in-knife-steel)
- [Toughness, edge retention and corrosion resistance](https://knifetemplates.com/steel/toughness-edge-retention-corrosion)
- [Knife steel: CPM MagnaCut](https://knifetemplates.com/steel/cpm-magnacut)
- [Knife steel: AEB-L](https://knifetemplates.com/steel/aeb-l)
- [All steel pages](https://knifetemplates.com/steel)

## Put it into practice

[Choose a template](https://knifetemplates.com/templates) [Read the print guide](https://knifetemplates.com/guides/print-at-actual-size) [Arrange blanks on stock](https://knifetemplates.com/nest)
