# Toughness, edge retention and corrosion resistance

> What toughness, edge retention and corrosion resistance mean, how each is measured, why improving one costs another, and why steel is not the whole story.

Source: https://knifetemplates.com/steel/toughness-edge-retention-corrosion

[Learn](https://knifetemplates.com/guides) / [Steel](https://knifetemplates.com/steel)

Every steel comparison comes down to the same three words. They are measured differently, they trade against each other, and none of them is more important than the knife's shape.

[Knife Templates](https://knifetemplates.com/makers/knife-templates) · 2 min read

## How each is measured

Toughness here is measured with a Charpy test, a subsize, unnotched one with 2.5 x 10 x 55 mm specimens. Edge retention is measured with CATRA, which measures abrasive wear of knives. Those are specific tests, and a figure from one is not a figure from another.

Hardness is a third thing, and the HRC number does not tell you either of the others on its own. That has its own guide.

## The trade-offs

"Usually more of one means less of the other." On carbide, "In general, more carbide means lower toughness but higher edge retention." And "There is no such thing as a steel that is a '10' in both toughness and edge retention."

Corrosion resistance has its own trade: "there is a trend where more corrosion resistant steels typically have a lower maximum hardness."

## Choosing

"Instead, selecting a steel is about prioritizing the categories." For one job, "For hard use knives it is better to use a high toughness steel like 8670, Z-Tuff, and AEB-L." Which categories matter depends on the knife. A kitchen knife that is washed and dried asks different things of the steel from a chopper that is dropped in mud.

## What steel cannot do

A great steel and heat treatment can't save a bad design, and the heat treatment can only do so much. The shape of the edge and how the knife is sharpened account for a lot of what people credit to the steel.

## On ratings

Ratings articles are common, and the advice from the metallurgy sources is to ignore them; even the ratings published with the testing carry a reservation that they may change with new information. I treat them as one metallurgist's judgement, so this site does not rank steels.

## Where this comes from

- [How to Pick the Best Steel for Every Knife](https://knifesteelnerds.com/2019/05/20/how-to-pick-the-best-steel-for-every-knife/), Knife Steel Nerds. Larrin Thomas’s method for choosing a steel, with his own recommendations. Opinion informed by his testing; the charts are images.
- [Knife Steels Rated by a Metallurgist: Toughness, Edge Retention, and Corrosion Resistance](https://knifesteelnerds.com/2021/10/19/knife-steels-rated-by-a-metallurgist-toughness-edge-retention-and-corrosion-resistance/), Knife Steel Nerds. One metallurgist’s ratings, which he says he may change. The rating tables are images, so this site quotes only the text.
- [13 Myths about Heat Treating Knives](https://knifesteelnerds.com/2020/07/13/13-myths-about-heat-treating-knives/), Knife Steel Nerds. Thirteen common claims and the author’s answers.
- [Carbide Types in Knife Steels](https://knifesteelnerds.com/2019/07/15/carbide-types-in-knife-steels/), Knife Steel Nerds. What carbides are and how their amount, size and hardness trade toughness against wear resistance.
- [Corrosion Resistance vs Hardness in Knife Steels](https://knifesteelnerds.com/2025/07/14/corrosion-resistance-vs-hardness-in-knife-steels/), Knife Steel Nerds. How hardness, tempering and chromium relate to corrosion resistance.

[Next up Carbon, stainless, tool and powder metallurgy steels The steel families and what each asks of the maker.](https://knifetemplates.com/steel/carbon-stainless-tool-and-powder)

## Keep reading

- [What is in knife steel](https://knifetemplates.com/steel/what-is-in-knife-steel)
- [Choosing steel for a knife](https://knifetemplates.com/steel)
- [Rockwell hardness (HRC) for knives](https://knifetemplates.com/guides/makers/8fa87d84-80ef-4b2d-8883-d5ed4c40d125)
- [All steel pages](https://knifetemplates.com/steel)

## Put it into practice

[Choose a template](https://knifetemplates.com/templates) [Read the print guide](https://knifetemplates.com/guides/print-at-actual-size) [Arrange blanks on stock](https://knifetemplates.com/nest)
