# Bunka knife template

> A free bunka knife template in 165 and 180 mm, with a reverse tanto tip. Print the A4 or US Letter PDF at actual size, or change it in the editor first.

Source: https://knifetemplates.com/templates/bunka

文化 Bunka / Hidden tang

If you like the size of a Santoku but want an angled point, this is the other profile I would put on the bench beside it.

Free template By [Knife Templates](https://knifetemplates.com/makers/knife-templates)

Choose an A4 or US Letter PDF at actual size. Print it as it is, or open it in the editor if you want to change something first.

- **[165mm](https://knifetemplates.com/templates/bunka/165mm)** [Download 165 mm A4 PDF 1 sheet](https://knifetemplates.com/templates/downloads/bunka-knife-template-165mm-a4.pdf) [Download 165 mm Letter PDF 1 sheet](https://knifetemplates.com/templates/downloads/bunka-knife-template-165mm-letter.pdf) [Open 165 mm in the editor](https://knifetemplates.com/editor?view=design&preset=bunka-165-6)
- **[180mm](https://knifetemplates.com/templates/bunka/180mm)** [Download 180 mm A4 PDF 1 sheet](https://knifetemplates.com/templates/downloads/bunka-knife-template-180mm-a4.pdf) [Download 180 mm Letter PDF 2 sheets](https://knifetemplates.com/templates/downloads/bunka-knife-template-180mm-letter.pdf) [Open 180 mm in the editor](https://knifetemplates.com/editor?view=design&preset=bunka-180-7)

![Bunka knife template, the 165 mm all-purpose kitchen knife with a K-tip outline](https://knifetemplates.com/template-images/bunka.svg)

## About the bunka

The Bunka base profile is tall for its length, with a straight facet meeting the edge at the point. Have a look at how that corner would work with the sort of prep you want to do.

Both starting sizes use the same construction. I would print the candidates together, measure the ruler, and compare the blade height and handle area before picking one to take further.

## This template

A fairly straight spine running into a straight tip facet, and an edge that stays flat through the back and rises towards the point. The 180 is a little taller at the heel than the 165.

| Blade length | Heel height | Overall length | Prints on |
| --- | --- | --- | --- |
| 165 mm | 48 mm | 255 mm | 1 A4 sheet; 1 Letter sheet |
| 180 mm | 52 mm | 270 mm | 1 A4 sheet; 2 Letter sheets |

## Files and editing

**Ready to print**

Actual-size A4 and US Letter PDFs for each size, with a 100 mm ruler and labelled seam lines when the drawing spans more than one sheet.

**Editable profile**

Open any size in the editor to adjust the outline, tang, holes and dimensions. No account needed.

**More output formats**

Use the editor for PDF, SVG and DXF export, other paper sizes, and a design file you can reopen later.

## Printing it

Print at 100% or Actual size, never Fit to page, and measure the 100 mm ruler on the sheet before you cut anything. The [print guide](https://knifetemplates.com/guides/print-at-actual-size) has the details.

![The A4 sheets for the Bunka 165 mm template](https://knifetemplates.com/template-images/bunka-165-6-sheets.svg)

*How the 165 mm prints, shrunk to fit the screen.*

## Changing it

If it is not quite the knife you have in mind, open it in the editor. You can type exact sizes or drag the outline, swap the tang, add pin holes and a bevel line, then print it or export a PDF, SVG or DXF. No account needed.

## Creator and use

**[Knife Templates](https://knifetemplates.com/makers/knife-templates)**.

Free to download and edit. The site terms apply to the service and its templates.

[Site terms](https://knifetemplates.com/terms)

## Steel and heat treating

The outline is where a build starts. How the knife performs comes from the steel and what you do to it, so I would settle both before cutting anything. [Which steel should your knife be?](https://knifetemplates.com/steel/which-steel) narrows the choice by your equipment and the knife, and [heat treating](https://knifetemplates.com/heat-treating) takes each stage in order.

## Other profiles

- [Gyuto 210 · 240 mm](https://knifetemplates.com/templates/gyuto)
- [Kiritsuke 180 · 210 mm](https://knifetemplates.com/templates/kiritsuke)
- [Santoku 165 mm](https://knifetemplates.com/templates/santoku)
- [Nakiri 165 mm](https://knifetemplates.com/templates/nakiri)
- [Petty 135 mm](https://knifetemplates.com/templates/petty)
- [Sujihiki 270 mm](https://knifetemplates.com/templates/sujihiki)

- [All knife templates](https://knifetemplates.com/templates)
- [Kitchen knife templates](https://knifetemplates.com/templates/kitchen)
- [Knife template PDFs](https://knifetemplates.com/templates/pdf)

## In the workshop

- [Compare this profile](https://knifetemplates.com/compare?templates=bunka-165-6)
- [How to print at actual size](https://knifetemplates.com/guides/print-at-actual-size)
- [Arrange blanks on stock](https://knifetemplates.com/nest)
