# Gyuto knife template

> A free gyuto knife template in 210 and 240 mm. Print the A4 or US Letter PDF at actual size, or change the shape in the editor first.

Source: https://knifetemplates.com/templates/gyuto

牛刀 Gyuto / Hidden tang

If you want an everyday kitchen knife, the Gyuto is a useful place to start. There is room here to work towards the length, belly and handle you enjoy using.

Free template By [Knife Templates](https://knifetemplates.com/makers/knife-templates)

Choose an A4 or US Letter PDF at actual size. Print it as it is, or open it in the editor if you want to change something first.

- **[210mm](https://knifetemplates.com/templates/gyuto/210mm)** [Download 210 mm A4 PDF 2 sheets](https://knifetemplates.com/templates/downloads/gyuto-knife-template-210mm-a4.pdf) [Download 210 mm Letter PDF 2 sheets](https://knifetemplates.com/templates/downloads/gyuto-knife-template-210mm-letter.pdf) [Open 210 mm in the editor](https://knifetemplates.com/editor?view=design&preset=gyuto-210-1)
- **[240mm](https://knifetemplates.com/templates/gyuto/240mm)** [Download 240 mm A4 PDF 2 sheets](https://knifetemplates.com/templates/downloads/gyuto-knife-template-240mm-a4.pdf) [Download 240 mm Letter PDF 2 sheets](https://knifetemplates.com/templates/downloads/gyuto-knife-template-240mm-letter.pdf) [Open 240 mm in the editor](https://knifetemplates.com/editor?view=design&preset=gyuto-240-2)

![Gyuto knife template, the 210 mm Japanese chef's knife outline](https://knifetemplates.com/template-images/gyuto.svg)

## About the gyuto

A gyuto is an all-purpose kitchen knife for meat, fish and vegetables. I would choose its length around the board and ingredients you normally work with, with a familiar knife beside you as a reference.

This base profile has a flatter run towards the heel and a gradual rise to the point. Think of it as an outline to build on: the thickness, grind, heat treatment and handle will do plenty to shape the finished knife too.

## This template

A fairly flat edge from the heel, a steady belly up to a fine tip, and a spine that stays high most of the way along before dropping to meet it. The tang is a 90 mm tapered nakago for a wa handle.

| Blade length | Heel height | Overall length | Prints on |
| --- | --- | --- | --- |
| 210 mm | 46 mm | 300 mm | 2 A4 sheets; 2 Letter sheets |
| 240 mm | 50 mm | 330 mm | 2 A4 sheets; 2 Letter sheets |

## Files and editing

**Ready to print**

Actual-size A4 and US Letter PDFs for each size, with a 100 mm ruler and labelled seam lines when the drawing spans more than one sheet.

**Editable profile**

Open any size in the editor to adjust the outline, tang, holes and dimensions. No account needed.

**More output formats**

Use the editor for PDF, SVG and DXF export, other paper sizes, and a design file you can reopen later.

## Printing it

Print at 100% or Actual size, never Fit to page, and measure the 100 mm ruler on the sheet before you cut anything. The sheets are labelled where they join: trim along the marked seam, line up the drawing where it continues, and tape them together. The [print guide](https://knifetemplates.com/guides/print-at-actual-size) has the details.

![The A4 sheets for the Gyuto 210 mm template](https://knifetemplates.com/template-images/gyuto-210-1-sheets.svg)

*How the 210 mm prints, shrunk to fit the screen.*

## Changing it

If it is not quite the knife you have in mind, open it in the editor. You can type exact sizes or drag the outline, swap the tang, add pin holes and a bevel line, then print it or export a PDF, SVG or DXF. No account needed.

## Creator and use

**[Knife Templates](https://knifetemplates.com/makers/knife-templates)**.

Free to download and edit. The site terms apply to the service and its templates.

[Site terms](https://knifetemplates.com/terms)

## Steel and heat treating

The outline is where a build starts. How the knife performs comes from the steel and what you do to it, so I would settle both before cutting anything. [Which steel should your knife be?](https://knifetemplates.com/steel/which-steel) narrows the choice by your equipment and the knife, and [heat treating](https://knifetemplates.com/heat-treating) takes each stage in order.

## Other profiles

- [Kiritsuke 180 · 210 mm](https://knifetemplates.com/templates/kiritsuke)
- [Santoku 165 mm](https://knifetemplates.com/templates/santoku)
- [Bunka 165 · 180 mm](https://knifetemplates.com/templates/bunka)
- [Nakiri 165 mm](https://knifetemplates.com/templates/nakiri)
- [Petty 135 mm](https://knifetemplates.com/templates/petty)
- [Sujihiki 270 mm](https://knifetemplates.com/templates/sujihiki)

- [All knife templates](https://knifetemplates.com/templates)
- [Kitchen knife templates](https://knifetemplates.com/templates/kitchen)
- [Knife template PDFs](https://knifetemplates.com/templates/pdf)

## In the workshop

- [Compare this profile](https://knifetemplates.com/compare?templates=gyuto-210-1)
- [How to print at actual size](https://knifetemplates.com/guides/print-at-actual-size)
- [Arrange blanks on stock](https://knifetemplates.com/nest)
