# Honesuki knife template

> A free 150 mm honesuki knife template with a high K tip. Print the A4 or US Letter PDF at actual size, or change the shape in the editor first.

Source: https://knifetemplates.com/templates/honesuki

骨スキ Honesuki / Hidden tang

A compact poultry-boning profile with a tall heel and a high point. If working around joints is the job you have in mind, this gives you a different starting shape from the general kitchen profiles.

Free template By [Knife Templates](https://knifetemplates.com/makers/knife-templates)

Choose an A4 or US Letter PDF at actual size. Print it as it is, or open it in the editor if you want to change something first.

- **150mm** [Download 150 mm A4 PDF 1 sheet](https://knifetemplates.com/templates/downloads/honesuki-knife-template-150mm-a4.pdf) [Download 150 mm Letter PDF 1 sheet](https://knifetemplates.com/templates/downloads/honesuki-knife-template-150mm-letter.pdf) [Open 150 mm in the editor](https://knifetemplates.com/editor?view=design&preset=honesuki-150-12)

![Honesuki knife template, the 150 mm Japanese poultry boning knife outline](https://knifetemplates.com/template-images/honesuki.svg)

## About the honesuki

Think of a honesuki as a knife for working around poultry joints, rather than chopping through bones. The triangular profile gives you a distinct point and plenty of heel to build the grind around.

This template starts double bevel. I would look at the edge support you need for the intended work before deciding how thin to take it.

## This template

A straight spine, and an edge that stays low at the heel and curves up through a shallow belly into a high, short K tip. It starts double bevel.

| Blade length | Heel height | Overall length | Prints on |
| --- | --- | --- | --- |
| 150 mm | 42 mm | 240 mm | 1 A4 sheet; 1 Letter sheet |

## Files and editing

**Ready to print**

Actual-size A4 and US Letter PDFs for each size, with a 100 mm ruler and labelled seam lines when the drawing spans more than one sheet.

**Editable profile**

Open any size in the editor to adjust the outline, tang, holes and dimensions. No account needed.

**More output formats**

Use the editor for PDF, SVG and DXF export, other paper sizes, and a design file you can reopen later.

## Printing it

Print at 100% or Actual size, never Fit to page, and measure the 100 mm ruler on the sheet before you cut anything. The [print guide](https://knifetemplates.com/guides/print-at-actual-size) has the details.

![The A4 sheets for the Honesuki 150 mm template](https://knifetemplates.com/template-images/honesuki-150-12-sheets.svg)

*How the 150 mm prints, shrunk to fit the screen.*

## Changing it

If it is not quite the knife you have in mind, open it in the editor. You can type exact sizes or drag the outline, swap the tang, add pin holes and a bevel line, then print it or export a PDF, SVG or DXF. No account needed.

## Creator and use

**[Knife Templates](https://knifetemplates.com/makers/knife-templates)**.

Free to download and edit. The site terms apply to the service and its templates.

[Site terms](https://knifetemplates.com/terms)

## Steel and heat treating

The outline is where a build starts. How the knife performs comes from the steel and what you do to it, so I would settle both before cutting anything. [Which steel should your knife be?](https://knifetemplates.com/steel/which-steel) narrows the choice by your equipment and the knife, and [heat treating](https://knifetemplates.com/heat-treating) takes each stage in order.

## Other profiles

- [Gyuto 210 · 240 mm](https://knifetemplates.com/templates/gyuto)
- [Kiritsuke 180 · 210 mm](https://knifetemplates.com/templates/kiritsuke)
- [Santoku 165 mm](https://knifetemplates.com/templates/santoku)
- [Bunka 165 · 180 mm](https://knifetemplates.com/templates/bunka)
- [Nakiri 165 mm](https://knifetemplates.com/templates/nakiri)
- [Petty 135 mm](https://knifetemplates.com/templates/petty)

- [All knife templates](https://knifetemplates.com/templates)
- [Kitchen knife templates](https://knifetemplates.com/templates/kitchen)
- [Knife template PDFs](https://knifetemplates.com/templates/pdf)

## In the workshop

- [Compare this profile](https://knifetemplates.com/compare?templates=honesuki-150-12)
- [How to print at actual size](https://knifetemplates.com/guides/print-at-actual-size)
- [Arrange blanks on stock](https://knifetemplates.com/nest)
