# Sujihiki knife template

> A free 270 mm sujihiki knife template on two A4 sheets. Print the A4 or US Letter PDF at actual size, or change the shape in the editor first.

Source: https://knifetemplates.com/templates/sujihiki

筋引 Sujihiki / Hidden tang

A long, low slicer for boneless meat and fish. I would choose this profile when you want the length for a slicing stroke without the height of a general chef knife.

Free template By [Knife Templates](https://knifetemplates.com/makers/knife-templates)

Choose an A4 or US Letter PDF at actual size. Print it as it is, or open it in the editor if you want to change something first.

- **270mm** [Download 270 mm A4 PDF 2 sheets](https://knifetemplates.com/templates/downloads/sujihiki-knife-template-270mm-a4.pdf) [Download 270 mm Letter PDF 2 sheets](https://knifetemplates.com/templates/downloads/sujihiki-knife-template-270mm-letter.pdf) [Open 270 mm in the editor](https://knifetemplates.com/editor?view=design&preset=sujihiki-270-10)

![Sujihiki knife template, the 270 mm Japanese slicing knife outline](https://knifetemplates.com/template-images/sujihiki.svg)

## About the sujihiki

The Sujihiki template starts double bevel, with a long working edge running towards a fine point. Put the full print beside your board and a familiar knife to get a feel for that length.

Remember to include the tang and your cutting clearances when checking it against the bar. A narrow blade can still take a surprising amount of stock once the complete outline is laid out.

## This template

Long and low, nearly straight to a fine tip. At this length it prints across two A4 sheets.

| Blade length | Heel height | Overall length | Prints on |
| --- | --- | --- | --- |
| 270 mm | 38 mm | 360 mm | 2 A4 sheets; 2 Letter sheets |

## Files and editing

**Ready to print**

Actual-size A4 and US Letter PDFs for each size, with a 100 mm ruler and labelled seam lines when the drawing spans more than one sheet.

**Editable profile**

Open any size in the editor to adjust the outline, tang, holes and dimensions. No account needed.

**More output formats**

Use the editor for PDF, SVG and DXF export, other paper sizes, and a design file you can reopen later.

## Printing it

Print at 100% or Actual size, never Fit to page, and measure the 100 mm ruler on the sheet before you cut anything. The sheets are labelled where they join: trim along the marked seam, line up the drawing where it continues, and tape them together. The [print guide](https://knifetemplates.com/guides/print-at-actual-size) has the details.

![The A4 sheets for the Sujihiki 270 mm template](https://knifetemplates.com/template-images/sujihiki-270-10-sheets.svg)

*How the 270 mm prints, shrunk to fit the screen.*

## Changing it

If it is not quite the knife you have in mind, open it in the editor. You can type exact sizes or drag the outline, swap the tang, add pin holes and a bevel line, then print it or export a PDF, SVG or DXF. No account needed.

## Creator and use

**[Knife Templates](https://knifetemplates.com/makers/knife-templates)**.

Free to download and edit. The site terms apply to the service and its templates.

[Site terms](https://knifetemplates.com/terms)

## Steel and heat treating

The outline is where a build starts. How the knife performs comes from the steel and what you do to it, so I would settle both before cutting anything. [Which steel should your knife be?](https://knifetemplates.com/steel/which-steel) narrows the choice by your equipment and the knife, and [heat treating](https://knifetemplates.com/heat-treating) takes each stage in order.

## Other profiles

- [Gyuto 210 · 240 mm](https://knifetemplates.com/templates/gyuto)
- [Kiritsuke 180 · 210 mm](https://knifetemplates.com/templates/kiritsuke)
- [Santoku 165 mm](https://knifetemplates.com/templates/santoku)
- [Bunka 165 · 180 mm](https://knifetemplates.com/templates/bunka)
- [Nakiri 165 mm](https://knifetemplates.com/templates/nakiri)
- [Petty 135 mm](https://knifetemplates.com/templates/petty)

- [All knife templates](https://knifetemplates.com/templates)
- [Kitchen knife templates](https://knifetemplates.com/templates/kitchen)
- [Knife template PDFs](https://knifetemplates.com/templates/pdf)

## In the workshop

- [Compare this profile](https://knifetemplates.com/compare?templates=sujihiki-270-10)
- [How to print at actual size](https://knifetemplates.com/guides/print-at-actual-size)
- [Arrange blanks on stock](https://knifetemplates.com/nest)
