About the choil drop point
This is one of my base profiles in the drop points family. Use the outline as it is if it suits your build, or open it in the editor and spend a little time getting the dimensions and handle how you want them.
This template
Full tang. A drop point with a finger choil and a curved handle. The starting blade is 100 mm long and 29.5 mm high at the heel. The outline, tang and handle can be adjusted before printing.
| Blade length | Heel height | Overall length | Prints on |
|---|---|---|---|
| 100 mm | 29.5 mm | 220.5 mm | 1 A4 sheet 1 Letter sheet |
Files and editing
- Ready to print
- Actual-size A4 and US Letter PDFs for each size, with a 100 mm ruler and labelled seam lines when the drawing spans more than one sheet.
- Editable profile
- Open any size in the editor to adjust the outline, tang, holes and dimensions. No account needed.
- More output formats
- Use the editor for PDF, SVG and DXF export, other paper sizes, and a design file you can reopen later.
Printing it
Print at 100% or Actual size, never Fit to page, and measure the 100 mm ruler on the sheet before you cut anything. The print guide has the details.
Changing it
If it is not quite the knife you have in mind, open it in the editor. You can type exact sizes or drag the outline, reshape the handle, add pin holes and a bevel line, then print it or export a PDF, SVG or DXF. No account needed.
Creator and use
A free Knife Templates base template. The site terms apply to the service and its templates.
Made from this template
See makers’ finished knives, photos and build notes in the project gallery for this template.