KnifeTemplates

牛刀 Gyuto profile

Gyuto knife template

The Gyuto is an all purpose kitchen knife profile with a flatter rear edge, a continuous belly and a fine tip. Start from a measured size, then adjust the blade, tang, curves, holes and marks to suit your build.

  • 180 mm base
  • 210 mm base
  • 240 mm base
  • Actual size print
  • PDF, SVG and DXF
Open 180 mm in the designerOpen 210 mm in the designerOpen 240 mm in the designer
Gyuto kitchen knife template profile

Shape and editing

The profile keeps useful flat contact near the heel while the edge rises progressively towards the point. Spine and edge handles remain editable, so the template can move from a restrained workhorse to a more pronounced cutting curve without redrawing the outline.

The base template is fully adjustable. Type exact measurements, drag the profile controls, set tang dimensions, add holes and marks, or convert the result into an editable node outline.

Choose a starting size

Choose 180 mm for a compact starting point, 210 mm for a balanced general kitchen format, or 240 mm when you want more edge length. These are editable starting dimensions, not fixed manufacturing specifications.

Every output should be checked before fabrication. Printer settings can change scale, so print at 100 percent and measure the calibration ruler on the finished sheet.

Files for the next step

Use PDF for a prepared print file, drawing SVG for the complete annotated profile, cut line SVG for a clean outline, or DXF for compatible CAD and cutting software. You can also save the editable design as JSON.