Template library

切付 Kiritsuke / Hidden tang

Kiritsuke knife template

This is my double bevel, gyuto-style starting point with an angled K-tip. If that point is part of the knife you have in mind, there is plenty here to work with.

Free templateBy Knife Templates

Choose an A4 or US Letter PDF at actual size. Print it as it is, or open it in the editor if you want to change something first.

Kiritsuke knife template, the 180 mm K-tip chef's knife outline

About the kiritsuke

Kiritsuke is a name you will see used for different constructions. The template here starts double bevel and is intended as an everyday kitchen profile, so I would compare it with the Gyuto when choosing.

Take a look at the whole edge as well as the point. The straight facet gives this outline its K-tip, but it does not decide the cross-section of the grind for you.

This template

The same heel and spine as the gyuto template, with a straight facet running down from the spine to the tip. The facet length and angle can be changed on their own.

Blade lengthHeel heightOverall lengthPrints on
180 mm42 mm270 mm1 A4 sheet
2 Letter sheets
210 mm46 mm300 mm2 A4 sheets
2 Letter sheets

Files and editing

Ready to print
Actual-size A4 and US Letter PDFs for each size, with a 100 mm ruler and labelled seam lines when the drawing spans more than one sheet.
Editable profile
Open any size in the editor to adjust the outline, tang, holes and dimensions. No account needed.
More output formats
Use the editor for PDF, SVG and DXF export, other paper sizes, and a design file you can reopen later.

Printing it

Print at 100% or Actual size, never Fit to page, and measure the 100 mm ruler on the sheet before you cut anything. The sheets are labelled where they join: trim along the marked seam, line up the drawing where it continues, and tape them together. The print guide has the details.

The A4 sheets for the Kiritsuke 180 mm template
How the 180 mm prints, shrunk to fit the screen.

Changing it

If it is not quite the knife you have in mind, open it in the editor. You can type exact sizes or drag the outline, swap the tang, add pin holes and a bevel line, then print it or export a PDF, SVG or DXF. No account needed.

Creator and use

Knife Templates.

Free to download and edit. The site terms apply to the service and its templates.

Site terms

Steel and heat treating

The outline is where a build starts. How the knife performs comes from the steel and what you do to it, so I would settle both before cutting anything. Which steel should your knife be? narrows the choice by your equipment and the knife, and heat treating takes each stage in order.

Made from this template

See makers’ finished knives, photos and build notes in the project gallery for this template.

Questions about the kiritsuke

Ask about this template, or read what others have asked, in the forum.

Knife Templates