Template library

三徳 Santoku / Hidden tang

Santoku knife template

A shorter kitchen profile with a flatter edge and a low point. I would put it beside the Gyuto and Bunka if you are deciding what feels right for everyday prep.

Free templateBy Knife Templates

Choose an A4 or US Letter PDF at actual size. Print it as it is, or open it in the editor if you want to change something first.

Santoku knife template, the 165 mm Japanese all-purpose kitchen knife outline

About the santoku

A santoku is an all-purpose kitchen knife for meat, fish and vegetables. The compact length makes it worth considering if a longer chef knife feels like more blade than you want.

In this template, the spine drops towards a low point and the edge has a flatter working section. Print it before settling on a handle; the screen is useful for shaping, but the paper makes the proportions much easier to judge.

This template

A long flat section and a tip that sits low, close to the edge. That low point is what makes it a santoku and not just a short gyuto.

Blade lengthHeel heightOverall lengthPrints on
165 mm48 mm255 mm1 A4 sheet
1 Letter sheet

Files and editing

Ready to print
Actual-size A4 and US Letter PDFs for each size, with a 100 mm ruler and labelled seam lines when the drawing spans more than one sheet.
Editable profile
Open any size in the editor to adjust the outline, tang, holes and dimensions. No account needed.
More output formats
Use the editor for PDF, SVG and DXF export, other paper sizes, and a design file you can reopen later.

Printing it

Print at 100% or Actual size, never Fit to page, and measure the 100 mm ruler on the sheet before you cut anything. The print guide has the details.

The A4 sheets for the Santoku 165 mm template
How the 165 mm prints, shrunk to fit the screen.

Changing it

If it is not quite the knife you have in mind, open it in the editor. You can type exact sizes or drag the outline, swap the tang, add pin holes and a bevel line, then print it or export a PDF, SVG or DXF. No account needed.

Creator and use

Knife Templates.

Free to download and edit. The site terms apply to the service and its templates.

Site terms

Steel and heat treating

The outline is where a build starts. How the knife performs comes from the steel and what you do to it, so I would settle both before cutting anything. Which steel should your knife be? narrows the choice by your equipment and the knife, and heat treating takes each stage in order.

Made from this template

See makers’ finished knives, photos and build notes in the project gallery for this template.

Questions about the santoku

Ask about this template, or read what others have asked, in the forum.

Knife Templates