Template library

文化 Bunka / Hidden tang

Bunka knife template

If you like the size of a Santoku but want an angled point, this is the other profile I would put on the bench beside it.

Free templateBy Knife Templates

Choose an A4 or US Letter PDF at actual size. Print it as it is, or open it in the editor if you want to change something first.

Bunka knife template, the 165 mm all-purpose kitchen knife with a K-tip outline

About the bunka

The Bunka base profile is tall for its length, with a straight facet meeting the edge at the point. Have a look at how that corner would work with the sort of prep you want to do.

Both starting sizes use the same construction. I would print the candidates together, measure the ruler, and compare the blade height and handle area before picking one to take further.

This template

A fairly straight spine running into a straight tip facet, and an edge that stays flat through the back and rises towards the point. The 180 is a little taller at the heel than the 165.

Blade lengthHeel heightOverall lengthPrints on
165 mm48 mm255 mm1 A4 sheet
1 Letter sheet
180 mm52 mm270 mm1 A4 sheet
2 Letter sheets

Files and editing

Ready to print
Actual-size A4 and US Letter PDFs for each size, with a 100 mm ruler and labelled seam lines when the drawing spans more than one sheet.
Editable profile
Open any size in the editor to adjust the outline, tang, holes and dimensions. No account needed.
More output formats
Use the editor for PDF, SVG and DXF export, other paper sizes, and a design file you can reopen later.

Printing it

Print at 100% or Actual size, never Fit to page, and measure the 100 mm ruler on the sheet before you cut anything. The print guide has the details.

The A4 sheets for the Bunka 165 mm template
How the 165 mm prints, shrunk to fit the screen.

Changing it

If it is not quite the knife you have in mind, open it in the editor. You can type exact sizes or drag the outline, swap the tang, add pin holes and a bevel line, then print it or export a PDF, SVG or DXF. No account needed.

Creator and use

Knife Templates.

Free to download and edit. The site terms apply to the service and its templates.

Site terms

Steel and heat treating

The outline is where a build starts. How the knife performs comes from the steel and what you do to it, so I would settle both before cutting anything. Which steel should your knife be? narrows the choice by your equipment and the knife, and heat treating takes each stage in order.

Made from this template

See makers’ finished knives, photos and build notes in the project gallery for this template.

Questions about the bunka

Ask about this template, or read what others have asked, in the forum.

Knife Templates