About the sujihiki
The Sujihiki template starts double bevel, with a long working edge running towards a fine point. Put the full print beside your board and a familiar knife to get a feel for that length.
Remember to include the tang and your cutting clearances when checking it against the bar. A narrow blade can still take a surprising amount of stock once the complete outline is laid out.
This template
Long and low, nearly straight to a fine tip. At this length it prints across two A4 sheets.
| Blade length | Heel height | Overall length | Prints on |
|---|---|---|---|
| 270 mm | 38 mm | 360 mm | 2 A4 sheets 2 Letter sheets |
Files and editing
- Ready to print
- Actual-size A4 and US Letter PDFs for each size, with a 100 mm ruler and labelled seam lines when the drawing spans more than one sheet.
- Editable profile
- Open any size in the editor to adjust the outline, tang, holes and dimensions. No account needed.
- More output formats
- Use the editor for PDF, SVG and DXF export, other paper sizes, and a design file you can reopen later.
Printing it
Print at 100% or Actual size, never Fit to page, and measure the 100 mm ruler on the sheet before you cut anything. The sheets are labelled where they join: trim along the marked seam, line up the drawing where it continues, and tape them together. The print guide has the details.
Changing it
If it is not quite the knife you have in mind, open it in the editor. You can type exact sizes or drag the outline, swap the tang, add pin holes and a bevel line, then print it or export a PDF, SVG or DXF. No account needed.
Creator and use
Free to download and edit. The site terms apply to the service and its templates.
Steel and heat treating
The outline is where a build starts. How the knife performs comes from the steel and what you do to it, so I would settle both before cutting anything. Which steel should your knife be? narrows the choice by your equipment and the knife, and heat treating takes each stage in order.
Made from this template
See makers’ finished knives, photos and build notes in the project gallery for this template.
Questions about the sujihiki
Ask about this template, or read what others have asked, in the forum.