Learn / Steel

Knife steel: 8670

If you want a tough knife and a forgiving heat treatment, 8670 is the steel I would check first. What you give up is edge life, which is a fair trade for the right knife.

Knife Templates · 2 min read

What it is

8670 is a nickel-chromium alloyed steel with high toughness and easy heat treatment. The composition figures in the source article are in images and I found no producer datasheet for 8670, so I give none here. It is not stainless, so it rusts if left wet.

What the testing found

It is a great choice for knives that need high toughness, and for beginning knifemakers and bladesmiths. The best specimens measured 27.4 ft-lbs in a quarter-size unnotched Charpy test, higher than the rest of that study using the same steel, so treat it as a best result and not an average.

The same view runs through the other testing: 8670 and 5160 are good choices for large knives that need very high toughness, a high toughness steel like 8670, Z-Tuff or AEB-L is better for hard use knives, and in forge testing 5160 and 8670 came out best for heavy choppers.

What it costs

Wear resistance is relatively low, which means great ease in grinding, finishing and sharpening. The source article does not test edge retention, so I make no claim about it beyond that: choose 8670 for toughness and an easy shop, not for a long-lasting edge.

Where to be careful

Overheating costs toughness for nothing: 1600-1625°F reduced toughness without improving hardness. No tempering embrittlement showed at 450°F in the tests, though some steels start to see tempered martensite embrittlement there. Be cautious about quenching anything in water.

Where this comes from

Next upKnife steel: D2A high-carbon, high-chromium tool steel that is not stainless and wants a cold step.

Comments

Questions, corrections and what worked for you. Upvote comments you find useful.

Loading comments…

Knife Templates