Learn / Heat treating

Heat treating knives in a salt pot

Molten salt heats steel quickly and keeps the air off it. It also asks for more respect than a furnace does.

Knife Templates · 2 min read

What it is and what it gives

A salt pot heats steel in molten salt. The advantages are that you do not need to protect the steel from oxygen, and liquid is much better at transferring heat than air, so blades come up to temperature faster.

The limits

Specific salts are used for different temperature ranges, and molten salts for stainless or high speed steels need different salts again. The verdict is that salt bath furnaces suit only those using a narrow range of steel types. The testing covered 1084, 52100 and O1, and did not cover stainless or high speed steels.

The safety rule

Water and molten salt do not mix. "If you drop significant amounts of water into the salt bath it could explode and you would be in significant danger." Wear "protective equipment such as a face shield and long sleeves," and keep every wet thing, including cold tongs and blades, away from the pot.

Where this comes from

Next upSending knives out to be heat treatedWhen to send it out, how factory and custom heat treating compare, and what to ask.

Comments

Questions, corrections and what worked for you. Upvote comments you find useful.

Loading comments…

Knife Templates