About the gyuto
A gyuto is an all-purpose kitchen knife for meat, fish and vegetables. I would choose its length around the board and ingredients you normally work with, with a familiar knife beside you as a reference.
This base profile has a flatter run towards the heel and a gradual rise to the point. Think of it as an outline to build on: the thickness, grind, heat treatment and handle will do plenty to shape the finished knife too.
This template
A fairly flat edge from the heel, a steady belly up to a fine tip, and a spine that stays high most of the way along before dropping to meet it. The tang is a 90 mm tapered nakago for a wa handle.
| Blade length | Heel height | Overall length | Prints on |
|---|---|---|---|
| 210 mm | 46 mm | 300 mm | 2 A4 sheets 2 Letter sheets |
| 240 mm | 50 mm | 330 mm | 2 A4 sheets 2 Letter sheets |
Files and editing
- Ready to print
- Actual-size A4 and US Letter PDFs for each size, with a 100 mm ruler and labelled seam lines when the drawing spans more than one sheet.
- Editable profile
- Open any size in the editor to adjust the outline, tang, holes and dimensions. No account needed.
- More output formats
- Use the editor for PDF, SVG and DXF export, other paper sizes, and a design file you can reopen later.
Printing it
Print at 100% or Actual size, never Fit to page, and measure the 100 mm ruler on the sheet before you cut anything. The sheets are labelled where they join: trim along the marked seam, line up the drawing where it continues, and tape them together. The print guide has the details.
Changing it
If it is not quite the knife you have in mind, open it in the editor. You can type exact sizes or drag the outline, swap the tang, add pin holes and a bevel line, then print it or export a PDF, SVG or DXF. No account needed.
Creator and use
Free to download and edit. The site terms apply to the service and its templates.
Steel and heat treating
The outline is where a build starts. How the knife performs comes from the steel and what you do to it, so I would settle both before cutting anything. Which steel should your knife be? narrows the choice by your equipment and the knife, and heat treating takes each stage in order.
Made from this template
See makers’ finished knives, photos and build notes in the project gallery for this template.
Questions about the gyuto
Ask about this template, or read what others have asked, in the forum.