Template library

出刃 Deba / Hidden tang

Deba knife template

The Deba is a more specialised build: a tall fish-preparation profile that starts single bevel. I would plan the stock and back face alongside the outline from the beginning.

Free templateBy Knife Templates

Choose an A4 or US Letter PDF at actual size. Print it as it is, or open it in the editor if you want to change something first.

Deba knife template, the 165 mm Japanese fish butchering knife outline

About the deba

A traditional Deba is used in fish preparation. That job calls for its own geometry and technique; it does not make every Deba a knife for arbitrary bone chopping or heavy general use.

The template gives you a side profile and a starting single bevel setting. I would treat the stock thickness and finished back-face geometry as separate parts of the build to work through before grinding.

This template

Tall at the heel, with a raised, stout point. It starts as a single bevel with the bevel on the right side, and you can change that.

Blade lengthHeel heightOverall lengthPrints on
165 mm50 mm255 mm1 A4 sheet
1 Letter sheet

Files and editing

Ready to print
Actual-size A4 and US Letter PDFs for each size, with a 100 mm ruler and labelled seam lines when the drawing spans more than one sheet.
Editable profile
Open any size in the editor to adjust the outline, tang, holes and dimensions. No account needed.
More output formats
Use the editor for PDF, SVG and DXF export, other paper sizes, and a design file you can reopen later.

Printing it

Print at 100% or Actual size, never Fit to page, and measure the 100 mm ruler on the sheet before you cut anything. The print guide has the details.

The A4 sheets for the Deba 165 mm template
How the 165 mm prints, shrunk to fit the screen.

Changing it

If it is not quite the knife you have in mind, open it in the editor. You can type exact sizes or drag the outline, swap the tang, add pin holes and a bevel line, then print it or export a PDF, SVG or DXF. No account needed.

Creator and use

Knife Templates.

Free to download and edit. The site terms apply to the service and its templates.

Site terms

Steel and heat treating

The outline is where a build starts. How the knife performs comes from the steel and what you do to it, so I would settle both before cutting anything. Which steel should your knife be? narrows the choice by your equipment and the knife, and heat treating takes each stage in order.

Made from this template

See makers’ finished knives, photos and build notes in the project gallery for this template.

Questions about the deba

Ask about this template, or read what others have asked, in the forum.

Knife Templates