Template library

骨スキ Honesuki / Hidden tang

Honesuki knife template

A compact poultry-boning profile with a tall heel and a high point. If working around joints is the job you have in mind, this gives you a different starting shape from the general kitchen profiles.

Free templateBy Knife Templates

Choose an A4 or US Letter PDF at actual size. Print it as it is, or open it in the editor if you want to change something first.

Honesuki knife template, the 150 mm Japanese poultry boning knife outline

About the honesuki

Think of a honesuki as a knife for working around poultry joints, rather than chopping through bones. The triangular profile gives you a distinct point and plenty of heel to build the grind around.

This template starts double bevel. I would look at the edge support you need for the intended work before deciding how thin to take it.

This template

A straight spine, and an edge that stays low at the heel and curves up through a shallow belly into a high, short K tip. It starts double bevel.

Blade lengthHeel heightOverall lengthPrints on
150 mm42 mm240 mm1 A4 sheet
1 Letter sheet

Files and editing

Ready to print
Actual-size A4 and US Letter PDFs for each size, with a 100 mm ruler and labelled seam lines when the drawing spans more than one sheet.
Editable profile
Open any size in the editor to adjust the outline, tang, holes and dimensions. No account needed.
More output formats
Use the editor for PDF, SVG and DXF export, other paper sizes, and a design file you can reopen later.

Printing it

Print at 100% or Actual size, never Fit to page, and measure the 100 mm ruler on the sheet before you cut anything. The print guide has the details.

The A4 sheets for the Honesuki 150 mm template
How the 150 mm prints, shrunk to fit the screen.

Changing it

If it is not quite the knife you have in mind, open it in the editor. You can type exact sizes or drag the outline, swap the tang, add pin holes and a bevel line, then print it or export a PDF, SVG or DXF. No account needed.

Creator and use

Knife Templates.

Free to download and edit. The site terms apply to the service and its templates.

Site terms

Steel and heat treating

The outline is where a build starts. How the knife performs comes from the steel and what you do to it, so I would settle both before cutting anything. Which steel should your knife be? narrows the choice by your equipment and the knife, and heat treating takes each stage in order.

Made from this template

See makers’ finished knives, photos and build notes in the project gallery for this template.

Questions about the honesuki

Ask about this template, or read what others have asked, in the forum.

Knife Templates